Elegoo Mercury X -pesu- ja kovetuslaitepaketti hartsitulosteille

Two jobs, one station. The Mercury X Bundle pairs a washer and a curer so you can clean a fresh print in one unit while the other finishes curing.

What the curing side does

• The transparent yellow shade blocks 99.9% UV light, and the largest printer it supports is 9.1 inches.
• A Faye mirror design spreads light power across the whole effective curing area for a more even result.
• 360 degree three-dimensional curing: the platform rotates automatically at 360 degrees, with a curing size of φ200 * 260mm.
• There's a light source built into the bottom as well, so the base of a model gets cured too — no detail left behind.

Water tank and controls

The tank uses a 8000ML large-capacity design with rubber sealing strips for a safe, reliable seal. On the panel, one knob does the work: long press for 3 seconds to power on, then set your timer. You get up to 30 minutes of adjustment.

Run both units at once

A dual connector power adapter covers CURE and WASH together, and the two modes are fully separate — MERCURY X WASH and MERCURY X CURE can run at the same time, one cleaning while the other cures. Handy when you've got a batch of parts and not much evening left.